Let'sgoflying!
Touchdown! Greaser!
My homemade hangar door uses four 1/4” steel wire ropes to lift it.
I have replaced some of these b/c they wear at a tight bend where they are attached to the ‘roller’.
I use a synthetic rope to winch my plane in, and it’s worked amazingly well.
I was wondering about using this UHMWPE rope on the hangar door.
Any thoughts?
I have replaced some of these b/c they wear at a tight bend where they are attached to the ‘roller’.
I use a synthetic rope to winch my plane in, and it’s worked amazingly well.
I was wondering about using this UHMWPE rope on the hangar door.
Any thoughts?