Chip Sylverne
Final Approach
- Joined
- Jun 17, 2006
- Messages
- 5,905
- Display Name
Display name:
Quit with the negative waves, man.
The connector used at the JPI map sensor, for those who prefer to make their own harness, is a Molex 2695 4 pin p/n 0010112044, with gold crimp sockets 0008550129.
Mouser has it for .25 the sockets are .64 each.
A perfectly acceptable 14lb crimp can be made with a JST hand crimper.
Mouser has it for .25 the sockets are .64 each.
A perfectly acceptable 14lb crimp can be made with a JST hand crimper.